氧化锆全陶瓷轴承
精密塑料轴承
氮化硅全陶瓷轴承
耐腐蚀塑料轴承
满装球全陶瓷轴承
抗酸碱塑料轴承
陶瓷保持架全陶瓷轴承
耐高温塑料轴承
混合陶瓷球轴承
塑料轴承座及塑料外球面轴承
不锈钢轴承 其他
不锈钢轴承
陶瓷球
奥氏体不锈钢轴承
工程塑料半成品
不锈钢轴承座及不锈钢外球面轴承
Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance,lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI,AISI SUS304,SUS316,Cu,etc.
Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.
Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.
Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.
Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.
氧化锆全陶瓷轴承
全陶瓷轴承具抗磁电绝缘、耐磨耐腐蚀、无油自润滑、耐高温耐高寒等特点， 可用于极度恶劣环境及特殊工况。套圈及滚动体采用氧化锆（ZrO2）陶瓷材料，保持器使用聚四氟乙烯（PTFE）作为标准配置，一般也可使用玻璃纤维增强的尼龙66（RPA66-25），特种工程塑料（PEEK，PI），不锈钢（AISISUS316），黄铜（Cu）等。
氮化硅全陶瓷轴承
氮化硅全陶瓷轴承套圈及滚动体采用氮化硅（Si3N4）陶瓷材料，保持器使用聚四氟乙烯（PTFE）作为标准配置，一般也可使用RPA66-25，PEEK，PI，以及酚醛夹布胶木管等。SiN4制全陶瓷轴承相比较ZrO2材料可适用于更高转速及负荷能力，以及适用于更高的环境温度。同时可提供用于高速高精度高刚性主轴的精密陶瓷轴承，最高制造精度达P4至UP级。
满装球全陶瓷轴承
满装球型全陶瓷轴承一面带添球缺口，因采用无保持架结构设计，可以比标准结构的轴承装入多的陶瓷球，从而提高其负荷能力，另外还可避免因保持架材料的限制，可达到陶瓷保持架型全陶瓷轴承耐腐蚀及耐温效果。该系列轴承不适宜较高转速，安装时应注意将缺口面装于不承受轴向负荷的一端。
陶瓷保持架全陶瓷轴承
陶瓷制保持架具有耐磨损,高强度,耐腐蚀及自润滑的优点,采用陶瓷保持架制造的全陶瓷轴承可使用 于极强腐蚀,超高低温及高真空等苛刻环境.常用陶瓷材料为ZrO2,Si3N4或SiC.
混合陶瓷球轴承
陶瓷球特别是氮化硅球具有低密度、高硬度、低摩擦系数，耐磨、自润滑及刚性好等特点，特别适合做高速、高精度及长寿命混合陶瓷球轴承的滚动体（内外圈为金属）。一般内外圈采用轴承钢 （GCr15）或不锈钢（AISI440C），陶瓷球可选用ZrO2，Si3N4，或SiC材料。
Plastic Bearings
Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.
Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:
Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.
High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.
Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice.
Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance,lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI,AISI SUS304,SUS316,Cu,etc.
Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.
Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.
Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.
Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.
Plastic Bearings
Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.
Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:
Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.
High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.
Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice. | 氧化锆全陶瓷轴承
精密塑料轴承
氮化硅全陶瓷轴承
耐腐蚀塑料轴承
满装球全陶瓷轴承
抗酸碱塑料轴承
陶瓷保持架全陶瓷轴承
耐高温塑料轴承
混合陶瓷球轴承
塑料轴承座及塑料外球面轴承
不锈钢轴承 其他
不锈钢轴承
陶瓷球
奥氏体不锈钢轴承
工程塑料半成品
不锈钢轴承座及不锈钢外球面轴承
Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance,lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI,AISI SUS304,SUS316,Cu,etc.
Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.
Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.
Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.
Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.
氧化锆全陶瓷轴承
全陶瓷轴承具抗磁电绝缘、耐磨耐腐蚀、无油自润滑、耐高温耐高寒等特点， 可用于极度恶劣环境及特殊工况。套圈及滚动体采用氧化锆（ZrO2）陶瓷材料，保持器使用聚四氟乙烯（PTFE）作为标准配置，一般也可使用玻璃纤维增强的尼龙66（RPA66-25），特种工程塑料（PEEK，PI），不锈钢（AISISUS316），黄铜（Cu）等。
氮化硅全陶瓷轴承
氮化硅全陶瓷轴承套圈及滚动体采用氮化硅（Si3N4）陶瓷材料，保持器使用聚四氟乙烯（PTFE）作为标准配置，一般也可使用RPA66-25，PEEK，PI，以及酚醛夹布胶木管等。SiN4制全陶瓷轴承相比较ZrO2材料可适用于更高转速及负荷能力，以及适用于更高的环境温度。同时可提供用于高速高精度高刚性主轴的精密陶瓷轴承，最高制造精度达P4至UP级。
满装球全陶瓷轴承
满装球型全陶瓷轴承一面带添球缺口，因采用无保持架结构设计，可以比标准结构的轴承装入多的陶瓷球，从而提高其负荷能力，另外还可避免因保持架材料的限制，可达到陶瓷保持架型全陶瓷轴承耐腐蚀及耐温效果。该系列轴承不适宜较高转速，安装时应注意将缺口面装于不承受轴向负荷的一端。
陶瓷保持架全陶瓷轴承
陶瓷制保持架具有耐磨损,高强度,耐腐蚀及自润滑的优点,采用陶瓷保持架制造的全陶瓷轴承可使用 于极强腐蚀,超高低温及高真空等苛刻环境.常用陶瓷材料为ZrO2,Si3N4或SiC.
混合陶瓷球轴承
陶瓷球特别是氮化硅球具有低密度、高硬度、低摩擦系数，耐磨、自润滑及刚性好等特点，特别适合做高速、高精度及长寿命混合陶瓷球轴承的滚动体（内外圈为金属）。一般内外圈采用轴承钢 （GCr15）或不锈钢（AISI440C），陶瓷球可选用ZrO2，Si3N4，或SiC材料。
Plastic Bearings
Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.
Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:
Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.
High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.
Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice.
Full ceramic(All-ceramic) bearing of ZrO2 materia
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance,lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI,AISI SUS304,SUS316,Cu,etc.
Full ceramic(All-ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure,the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phenolic Textolite Tube ,etc. Compares than the material of ZrO2 ,The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle.the manufactured clearance could be P4 TO UP grade.
Full ceramic(All-ceramic) bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no frame design, the bearing able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the frame material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high -speed choice, it should be to install on the unforced side.
Full ceramic(All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic materials are ZrO2, Si3N4 or Sic.
Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low tribology modulus, wear resistance, well rigidity, lubrication and maintenance free when working, it's the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and long life environments. Normally, GCr15 or AISI440C makes inner ring and outer ring; the ceramic ball can adopt ZrO2, Si3N4 or Sic.
Plastic Bearings
Precision plastic bearing
Precision plastic bearings,have the more exact rolling accuracy and more strict dimension tolerance. The proper material, which is prone to precision machining, is selected to make the inner ring, outer ring, balls and cage, could be used in precision and high-speed running applications.
Anti-Corrosion Plastic Bearings
Various material such as;POM, PP, PA, PBT, UHMWPE, PTFE,PEEK may be selected for their resistance to chemicals aim at various anti-corrosion application, Such bearings can operate in liquids and contamination sensitive environments even eroded in the most inclemency acid/ alkali/ salt/ impregnant/ oil/ gas/ seawater. Generally materials are fit together as following:
Anti-Acid & Anti-Alkali Bearing
HDPE, PE, UHMWPE are approved can be used in faintish acid and alkali environment. (30% CuCl2 solution and 30% NaOH solution is tested ok). PVDF AND PTFE can be used in strong acid and alkali environment. therein?PTFE can be used in thick acid and alkali environment, including HF oleum and nitric acid.
High Temperature Application Plastic Bearings
PVDF, PTFE (Teflon), PPS, PEEK, PI were approved which are the perfect material for high temperature application plastic bearings. therein , PI can be used at 300? in long-term?short-term can endure 350?, which is the best one on the known project plastic.
Plastic Inserts & Plastic Pillow Blocks
The plastics insert bearings specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, be freed from the maintenance and so forth, aim at working in different environment the material of PBT, UHMN, and PTFE can be provided as choice. |
轴承黄页
咨询系统
意见箱(0)